I bought these fog lights with LEDs, but not sure how to wire the LEDs. Each light has a main harness for the main light, and that plugs directly to another harness that runs to the battery and to a switch in the car. I figured out how to run the wires and the main fog lights are working perfectly with the switch, but the LEDs aren't.
The LEDs are separate wires, two pairs per light, so four wires. I'm not sure where these wires should go. There are no instructions with the parts.
So do I tap into the main light harness for the LEDs? It's kinda strange that it is not pre-wired to do that. I guess that's what I get when I went with the cheap after market crap.