god =[ i hate those band wrenches
i can never get them to hold onto the filter.
>.<;; if you have the same problem as me just get filter pilers.
for the tC it's fairly easy since the filter is right there.
For the band wrench to work correctly, just put you finger on the band to hold it in place while you're tightening it and you shouldn't have a problem. It took me a couple tries when I first got it, but once I figured out how to use it properly it was effortless.
Just make sure not to use the wrench to tighten the oil filter. The filter only needs to be hand tight. If you over tighten the oil filter the gasket can squeeze out the size and you'll have a major oil leak. Also make sure to take some clean oil and coat the seal before putting the oil filter back on. It will come of much easier the next time